Concept

False origin — where it appears

A constant added to a grid's coordinates so that every value in the area of use is positive. It is a convention with a measurable consequence: where the origin was put decides the ground resolution a single-precision coordinate can hold, by a factor of sixty-four.

Named by 8 essays across 3 fields — each of them below, with the objects they name alongside it.

A false origin moves every number and no geometry. British National Grid, drawn twice at the same scale. On the left the coordinates are measured from the projection's own origin, where the central meridian meets the true origin's parallel, and 52% of the country takes a negative easting or northing — the worst reaching -323 km. On the right the authority's published false origin of 400 km east and -100 km north has been applied, and none of them does. Every distance computed from the two sets of numbers agrees to the last bit a double has left after carrying six figures, and every bearing agrees exactly; the only thing that changed is that no coordinate carries a sign. The margins say the origin was fitted to the land rather than placed arbitrarily below it: 77 km spare in the west and 50 m in the south, on a grid 988 km tall.

A grid has an origin that is not there

Every published national grid measures from a point in the sea. The British one sits 400 kilometres west and 100 kilometres south of where the projection's own zero is, and moving it changes every coordinate in the country and not one distance or bearing.

practice · Grid

Only one of a grid's five parameters changes the map. The same ground point written on the British National Grid and on UTM zone 31N, with the difference between the two coordinate pairs taken apart. The largest term by four orders of magnitude is where the two grids put zero — 5544 km, being a different central meridian, a different true origin and different false constants, all of which move every coordinate and no distance. The datum, which is the term everybody names, moves the ground 106 m. And the whole geometric difference between two transverse Mercators is their scale factors — 0.9996012717 against 0.9996 — which at this point is 50 cm. Four of a grid's five parameters are bookkeeping; the fifth is the map.

What a grid is made of

A projected coordinate declares five things — a datum, a projection, its parameters, a unit and an axis order — and four of them are invisible in the numbers. Every one has a documented case of being guessed wrong, and the cheapest of those cost a hundred metres.

practice · Grid

Two feet, and the one that is not a rounding. The US survey foot is 1200/3937 m and the international foot is exactly 0.3048 m, so the first is longer by 2.0000 parts per million. Read a coordinate in the wrong one and the error is proportional to the coordinate, not to any distance in the job: at 2.5 million feet from the false origin it reaches 1.52 m, and it crosses a survey's own closing tolerance of twenty millimetres at 33 thousand feet. Across a 300-foot site the same mistake changes every dimension by 0.18 mm — below every tolerance there is, which is why a plan in the wrong foot passes every check and is in the wrong place.

The units are part of the coordinate

Two feet were in use in the United States until 2022, differing by exactly two parts per million. A plan drawn in the wrong one has every dimension right to a fifth of a millimetre and sits three-quarters of a metre from where it belongs, which is why it passes every check anybody runs.

practice · Grid

Both zones are right, and one of each is not. A 20 km baseline straddling the boundary between UTM zones 31 and 32 at 52°N, computed from grid coordinates three ways, on logarithmic bars. Taking both ends in zone 31 and taking both in zone 32 give answers 0 nanometres apart — the resolution a double has left after carrying a six-figure easting rather than a disagreement — so a job may use either and the overlap belt every zone publishes exists to let it. Taking each end from the zone it nominally belongs to gives 392 km, because the two eastings are measured from meridians six degrees apart and subtracting them measures nothing at all. The same ground point is 706 km east in one zone and 294 km east in the other, and both coordinates are correct.

Where two zones meet

A twenty-kilometre baseline across a zone boundary is computed correctly in either zone — the two answers differ by nanometres — and taking one end from each returns 392 kilometres. Both zones are right and the seam between them is not a small error but a category one.

practice · Grid

Two grids over the same ground

One point in the English Midlands is 406,788 east on the British grid and 167,478 east on UTM. Separating the difference properly leaves a surprise — only one of a grid's five parameters changes the map, and it is not any of the four that dominate the number.

practice · Reduction

What the 5th decimal place of a coordinate is worth on the ground. A latitude written to 5 decimal places steps 1.112 m north for one unit in its last digit, at every latitude, because the meridian does not care where it is measured. A longitude written to the same 5 places steps 1.112 m east on the equator and 0.097 m at 85°, because a degree of longitude is a degree of a circle whose radius is R cos φ. The same written precision means two different distances at the same point, and a different pair at every other.

A coordinate is a number with a width

Every number on this site so far has been exact. A written coordinate is not: five decimal places of a degree is 1.112 metres of latitude everywhere and 1.112 metres of longitude only on the equator, falling to 0.097 at 85°. The same written precision carves the ground into a cell that is square in one place and eleven times longer than it is wide in another.

distortion · Precision

What a 3-figure grid reference names. The square is the 100-metre cell a 3-figure reference stands for, and the filled dot is the point the reference was made from. A reference is TRUNCATED rather than rounded, so the digits name the square's south-west corner — the open dot — which here is 9.1 metres west and 82.8 metres south of the point. Rounding would have landed on the nearest corner instead, 9.1 metres away east–west. The truncation is deliberate: it is what makes a shorter reference a larger square containing the same point.

A grid reference names a square

This ladder has priced everything about a grid except how a coordinate on it is written. A grid reference is truncated rather than rounded, so it names the south-west corner of a square rather than a point in it — and a population of references is displaced half a cell each way, which is a bias rather than scatter and does not average out.

practice · Grid

A plane fit swallows a datum shift, and keeps swallowing it. A map of OSGB36's ground drawn as though it were on WGS84, at seven sheet sizes. The upper curve is how far the drawing moves — a real 99-metre error on the ground — and the lower one is what survives the best similarity between the two, which is what a fit for the projection removes for free. The absorption runs from 99.68 per cent on a 1° sheet to 85.16 on a 60° one, and what is left is 3.9 parts per million of the map's own size even then — two microns on a sheet half a metre across.

The datum hides inside the projection's parameters

Six essays recover a projection from control points with the body it was drawn on taken as known. It is not known, and the fit cannot find it: a 99-metre datum shift is absorbed to 99.7 per cent on a two-degree sheet and to 85 per cent on a hemisphere, leaving eleven parts per million of the map behind.

wrong · Identify

Named alongside it

The objects these essays reach for when they reach for this one.

Convention National Grid Scale factor Coordinate reference system UTM Central meridian Datum Realisation Tolerance Unit of measure Zone EPSG

All concepts