Concept

Unit of measure — where it appears

The unit a coordinate's numbers are in, which is part of the coordinate rather than a presentation detail. Several national grids are defined in feet of definitions that differ in the seventh figure, which is centimetres across a country.

Named by 6 essays across 3 fields — each of them below, with the objects they name alongside it.

Only one of a grid's five parameters changes the map. The same ground point written on the British National Grid and on UTM zone 31N, with the difference between the two coordinate pairs taken apart. The largest term by four orders of magnitude is where the two grids put zero — 5544 km, being a different central meridian, a different true origin and different false constants, all of which move every coordinate and no distance. The datum, which is the term everybody names, moves the ground 106 m. And the whole geometric difference between two transverse Mercators is their scale factors — 0.9996012717 against 0.9996 — which at this point is 50 cm. Four of a grid's five parameters are bookkeeping; the fifth is the map.

What a grid is made of

A projected coordinate declares five things — a datum, a projection, its parameters, a unit and an axis order — and four of them are invisible in the numbers. Every one has a documented case of being guessed wrong, and the cheapest of those cost a hundred metres.

practice · Grid
Two feet, and the one that is not a rounding. The US survey foot is 1200/3937 m and the international foot is exactly 0.3048 m, so the first is longer by 2.0000 parts per million. Read a coordinate in the wrong one and the error is proportional to the coordinate, not to any distance in the job: at 2.5 million feet from the false origin it reaches 1.52 m, and it crosses a survey's own closing tolerance of twenty millimetres at 33 thousand feet. Across a 300-foot site the same mistake changes every dimension by 0.18 mm — below every tolerance there is, which is why a plan in the wrong foot passes every check and is in the wrong place.

The units are part of the coordinate

Two feet were in use in the United States until 2022, differing by exactly two parts per million. A plan drawn in the wrong one has every dimension right to a fifth of a millimetre and sits three-quarters of a metre from where it belongs, which is why it passes every check anybody runs.

practice · Grid
53° north, 2° west: four places one pair of numbers could be. The same two numbers, read as three datums and as the pair in the other order. The centre is the WGS84 reading; the marks are where the ground is if the numbers were measured against OSGB36, ED50, NAD27 instead, at 103 m, 138 m, 195 m. Every one of those is a plausible position — near enough to look like a survey difference and far enough to be a different field. Reversing the two numbers instead moves the point 7942 kilometres, and is the mistake nobody worries about because it is usually obvious.

A coordinate without its system is not a location

The same two numbers name ground 103 metres apart on one datum, 195 on another, and 7,942 kilometres away if the pair is read in the other order. The datum errors are the dangerous ones because they are plausible — and the axis swap, which everyone calls obvious, does nothing at all along a line that crosses three continents.

applied · Dataset
"Within 0.01°" on the ground, at five latitudes. The same condition drawn at five latitudes, all at one scale. A degree of latitude is a fixed distance — 1106 metres here, varying by less than one per cent from equator to pole — while a degree of longitude collapses as cos φ, from 1113 metres to 289 at 75°. So the "circle" is an ellipse of 3.86:1 there, and it encloses 26 per cent of the ground the same condition covers on the equator. Even on the equator it is not round: M is smaller than N by the flattening, so the shape is 6694 parts per million shorter north–south than east–west.

A degree is not a unit of length

"Within 0.01 degrees" is a condition anybody can write and no instrument can measure. On the ground it is an ellipse — 1,106 metres north–south and 558 east–west at 60° — and even on the equator it is not a circle, because the meridian's radius of curvature is smaller than the parallel's by the flattening.

applied · Dataset
What the 5th decimal place of a coordinate is worth on the ground. A latitude written to 5 decimal places steps 1.112 m north for one unit in its last digit, at every latitude, because the meridian does not care where it is measured. A longitude written to the same 5 places steps 1.112 m east on the equator and 0.097 m at 85°, because a degree of longitude is a degree of a circle whose radius is R cos φ. The same written precision means two different distances at the same point, and a different pair at every other.

A coordinate is a number with a width

Every number on this site so far has been exact. A written coordinate is not: five decimal places of a degree is 1.112 metres of latitude everywhere and 1.112 metres of longitude only on the equator, falling to 0.097 at 85°. The same written precision carves the ground into a cell that is square in one place and eleven times longer than it is wide in another.

distortion · Precision
The same tolerance, applied in two orders, at 65°. The faint line is the region's boundary as built, 1025 vertices across 400 km of ground. Both pipelines were given the same tolerance of 2000 m on the ground. Simplifying in degrees and then projecting keeps 311 of them; projecting into Mercator and then simplifying keeps 129; doing it on the ground itself, which no pipeline does, keeps 129. The two drawn lines separate by 1883 m, which is 94 per cent of the tolerance that was supposed to bound the whole operation.

Simplification does not commute with the projection

A pipeline either simplifies the geometry and then projects it, or projects it and then simplifies. Both orders are in use, neither is recorded, and given the same tolerance in ground metres they keep different vertices — 129 of them on the ground, 367 in degree space at 80°, and 459 on an equal-area page.

applied · Generalise

Named alongside it

The objects these essays reach for when they reach for this one.

ConventionCoordinate reference systemScale factorToleranceEPSGFalse originNational GridRealisationVerificationAxis orderDatumEqual-area

All concepts