Cartographic Projection
every map is wrong, and by exactly how much
Concept

Traverse — where it appears

A chain of measured distances and angles running between known points, which is how a survey carries position across ground. It must close, and the amount by which it fails to is the only evidence it offers about its own quality.

Named by 4 essays across 2 fields — each of them below, with the objects they name alongside it.

A closed traverse cannot see a scale error. The same closed figure with two different errors in it. On the left every leg is 400 parts per million too long, which is roughly what forgetting the grid scale factor costs — and the figure closes to 2.3e-13 m, which is the last bit of a double rather than a measurement. Scaling every leg of a closed figure by the same factor produces a similar figure and a similar figure is still closed, so the check every specification leans on is blind to it. Every dimension in that figure is wrong: the perimeter is out by 1.17 m. On the right one angle is 20 seconds out — a far smaller disturbance in its own units — and the figure fails to close by 0.062 m. Closure tests the shape and says nothing about the size.

A traverse must close

The check every survey specification leans on cannot see the error this whole field is about. Scale every leg of a closed figure by four hundred parts per million and it closes to the last bit of a double, while every dimension in it is wrong.

practice · Reduction Two conventions, and neither of them finds the blunder. A blunder of 350 mm added to leg 3 of a closed traverse, producing a misclosure of 350 mm — one part in 8344, which most specifications would accept. Bowditch's rule shares the misclosure out in proportion to leg length; the Transit rule shares it in proportion to each leg's component along the axis being corrected. Both close the figure exactly, so both are valid; they disagree with each other by up to 14 mm; and neither puts more than 104 mm of correction on the leg that is actually wrong. A rule for distributing a misclosure is a convention for producing consistent numbers, and it is not an instrument for finding errors.

The two ways to spread a misclosure

Bowditch's rule and the Transit rule take the same closed figure and the same misclosure and disagree about which legs were wrong. Both close it exactly, neither puts the correction on the leg that actually carries the blunder, and no measurement can settle which is right.

practice · Reduction What a 20 mm closure tolerance lets each station hide. A closed traverse of seven stations in plan, each labelled with the angle blunder that would leave the closure inside a 20 millimetre tolerance. An angle error at a station rotates everything downstream of it about that station, so the closing point moves by the distance from the station to the close — and the last station before the close stands 72 metres from it and can hide 57 arcseconds, against 2.1 at the worst-placed station. The check is not insensitive; it is unevenly sensitive, and nothing in the specification says so.

What a closed figure cannot see

A closed traverse imposes exactly two conditions on its observations, so everything else is free — and the freedom is not spread evenly. At a twenty-millimetre tolerance the worst-placed station in a seven-station loop hides an angle blunder of 2.1 arcseconds and the station standing seventy-two metres from the close hides 57, because a rotation about a point near the finish moves the finish hardly at all.

practice · Reduction The bias is σ² over the length, over two decades. The amount by which a measured baseline is longer than the true one, against its length, for a twenty-millimetre error on each end. The line is the second-order prediction σ²/d. The measured bias times the length is constant to a factor of 1.0014 across the whole range, and it sits 8.2 per cent below the prediction — which is the fourth-order term the expansion drops. The estimate is antithetic, so the first-order scatter cancels exactly and a bias of thirty-seven microns is measured at a t-statistic of 349.

A length measured from noisy points is too long

A distance is a square root, a square root is concave, and the average of the distances is not the distance between the averages. The gap is a bias with one sign: 37 microns on a ten-metre baseline with twenty-millimetre marks, following σ² over the length across two decades, and it adds rather than cancelling — so the same boundary is 1.5 parts per million longer when it is measured in more pieces.

distortion · Precision

Named alongside it

The objects these essays reach for when they reach for this one.

ToleranceVerificationAssertionBearingConventionMisclosureNational GridPrecisionAntitheticBaselineBiasBlunder

All concepts