Cartographic Projection
every map is wrong, and by exactly how much
Concept

Unfolding — where it appears

Rotating one face of a polyhedron about a shared edge until it lies in its neighbour's plane. It is an isometry of the solid's surface, so every length on the surface survives it and a curve that was straight on the surface stays straight.

Named by 3 essays across one field — each of them below, with the objects they name alongside it.

Two unfoldings of the same 80-face solid. Both are edge unfoldings of the same solid along different spanning trees of its face graph, so both preserve every distance on the surface exactly. The left one is a net. The right one is not: 3 pairs of its faces occupy the same ground, so it cannot be cut out of paper and folded up. Nothing in the unfolding procedure prevents this, and past the regular solids most trees produce it.

A net can land on top of itself

Every one of the cube's 384 unfoldings is a net, and every one of the icosahedron's five million is too. Past the regular solids that stops being true: at 180 faces, 99 of every 100 randomly chosen unfoldings have faces sitting on top of each other, so choosing a net stops being a choice and becomes a search — except that the net anybody would actually draw works every time.

families · Polyhedral The corner an equal-area face map puts in a feature, and the one the gnomonic does not. A great circle crossing the seam between two faces, drawn on each face's own map and unfolded flat, with the angle between the incoming and outgoing tangents plotted against how obliquely it crosses. Under the equal-area face map every solid gives a corner: zero for a perpendicular crossing, where the two faces are symmetric about the edge, peaking near thirty degrees of obliquity and falling again as the crossing lies down along the edge. Under the gnomonic it is zero at every angle on every solid, which is the flat line on the axis.

The gnomonic crosses a seam without a corner

Eight rungs choose a solid, a face map and where to cut. This one is about a seam the net does not cut, where two faces stay joined and carry two different maps — and the expectation was a corner in every feature crossing one. At the midpoint of the edge — which is where every crossing here is taken, and which turns out to be the one place on it a face's own mirror forces the corner to vanish — the gnomonic gives none at any obliquity on any Platonic solid, and the equal-area face map gives one of up to 0.39 degrees.

families · Polyhedral The corner against where along the seam the feature crosses. A feature crossing the seam of a cube at right angles, drawn on each face's own map and unfolded, with the crossing moved along the edge. Every curve starts at zero, because the face's mirror through the edge's own midpoint reverses the along-edge direction and forces the shear term in the Jacobian to be odd. Away from it the gnomonic — the map with no corner at all in the rung below — reaches 44.4°, three times the equal-area map's and far past the conformal one's. The edge's half-length is 35.3°, so the right-hand end is still well inside it.

The corner is not at the midpoint

The rung below measured the corner a feature gets crossing a polyhedral seam, and found none at all under the gnomonic face map. It crossed at the edge's own midpoint every time — the one point on the edge where a face's own mirror symmetry forces the corner to vanish. Two fifths of the way to the vertex the gnomonic gives 20.15°, the equal-area map 7.28° and the conformal map under a degree, which reverses the ordering entirely.

families · Polyhedral

Named alongside it

The objects these essays reach for when they reach for this one.

FacePolyhedral projectionEqual-areaGnomonicSeamVerificationCombinatoricsConformalityContinuityDihedralGoldberg polyhedronGreat circle

All concepts