Cartographic Projection
every map is wrong, and by exactly how much
Concept

Face — where it appears

One flat piece of a polyhedral map, carrying the part of the sphere nearest its own centre and joined to its neighbours along an edge or cut from them. The face is where a polyhedral map's distortion is smallest and where every distortion measure is computed, so none of them can see the corners.

Named by 7 essays across one field — each of them below, with the objects they name alongside it.

The icosahedron's faces, drawn on the sphere. The edges of the icosahedron projected radially onto the sphere, which is the partition of the world a polyhedral map uses: everything inside one spherical polygon is drawn on one flat face. Each face spans 25.8° from its centre to its own boundary, and the gnomonic map onto it reaches 6.6° of angular deformation at the corners. Drawn in an orthographic projection of the embedding, which is a map with its own distortion.

The globe on a solid

Cylinder, cone and plane are not the only surfaces a sphere can be laid on. Project it onto a polyhedron and the curvature goes entirely to the corners — π at each of the tetrahedron's four, π/5 at each of the dodecahedron's twenty, and always 4π in total, which is exactly the curvature of the sphere it replaced.

families · Polyhedral One face of an icosahedron, two ways. The same spherical face mapped onto the same flat triangle by two different rules, with a grid of marks whose size is the local areal factor. The gnomonic map draws every great circle straight and stretches the corners by a factor of 1.50; the area-preserving map holds the areal factor at one to a part in a million and pays in shape, reaching 11.9° of angular deformation against the gnomonic's 8.0°. Both take the face's boundary to the face's boundary, which is what lets the pieces still fit together.

What a face can preserve

The obvious map onto a polyhedron's face is the gnomonic, and it draws every great circle straight while stretching the corners by a factor of 1.50. Replace it with a construction that holds the areal factor at one to a part in a million and the shape error rises from 8.0° to 11.9° — the same trade the whole sphere forces, arriving on a piece of it a twentieth the size.

families · Polyhedral The conformal map onto a square face of a cube. The spherical face of a cube carried onto its flat face by a map that is conformal everywhere — the measured angular deformation over the drawn interior is 1.63e-6°, which is the arithmetic's own floor. The rings and spokes are circles and radii on the sphere, and they cross at right angles here because that is what conformal means. The map was solved for as 16 terms of a series rather than written down: the face's edge comes out straight to 0.33 per cent of its own half-width, and that residual — not the conformality — is what more terms buy. At each corner the map behaves like ζ^0.75, so the scale factor there is infinite.

A conformal map onto a face

The polyhedral ladder ended owing a conformal face map, on the grounds that it needs elliptic functions. It does not: a conformal map of the sphere is an analytic function of one conformal coordinate, so the map is a power series, choosing it is a least-squares fit — and its scale factor is infinite at the corners, which is the angle deficit arriving as a singularity.

families · Polyhedral Two nets of the same solid, cut to the same length. Every net of a Platonic solid severs exactly the same number of edges, all of the same length, so the total length of the cut is a constant and cannot choose between them. Each line joins the two places a severed edge ends up. Left: the net that keeps them closest, 11.30 edge lengths in total. Right: the net that puts them furthest apart, 17.97 — a factor of 1.59 for the same amount of cutting.

The net that loses the fewest neighbours

Every one of the cube's 384 nets cuts exactly seven edges of exactly the same length, so the quantity this collection has been pricing cutting by is a constant that cannot choose between them. Measured on the reader's side — how far apart a net puts two places that touch on the globe — the best net scores 11.30 and the worst 17.97, for identical cutting.

families · Polyhedral Two unfoldings of the same 80-face solid. Both are edge unfoldings of the same solid along different spanning trees of its face graph, so both preserve every distance on the surface exactly. The left one is a net. The right one is not: 3 pairs of its faces occupy the same ground, so it cannot be cut out of paper and folded up. Nothing in the unfolding procedure prevents this, and past the regular solids most trees produce it.

A net can land on top of itself

Every one of the cube's 384 unfoldings is a net, and every one of the icosahedron's five million is too. Past the regular solids that stops being true: at 180 faces, 99 of every 100 randomly chosen unfoldings have faces sitting on top of each other, so choosing a net stops being a choice and becomes a search — except that the net anybody would actually draw works every time.

families · Polyhedral The corner an equal-area face map puts in a feature, and the one the gnomonic does not. A great circle crossing the seam between two faces, drawn on each face's own map and unfolded flat, with the angle between the incoming and outgoing tangents plotted against how obliquely it crosses. Under the equal-area face map every solid gives a corner: zero for a perpendicular crossing, where the two faces are symmetric about the edge, peaking near thirty degrees of obliquity and falling again as the crossing lies down along the edge. Under the gnomonic it is zero at every angle on every solid, which is the flat line on the axis.

The gnomonic crosses a seam without a corner

Eight rungs choose a solid, a face map and where to cut. This one is about a seam the net does not cut, where two faces stay joined and carry two different maps — and the expectation was a corner in every feature crossing one. At the midpoint of the edge — which is where every crossing here is taken, and which turns out to be the one place on it a face's own mirror forces the corner to vanish — the gnomonic gives none at any obliquity on any Platonic solid, and the equal-area face map gives one of up to 0.39 degrees.

families · Polyhedral The corner against where along the seam the feature crosses. A feature crossing the seam of a cube at right angles, drawn on each face's own map and unfolded, with the crossing moved along the edge. Every curve starts at zero, because the face's mirror through the edge's own midpoint reverses the along-edge direction and forces the shear term in the Jacobian to be odd. Away from it the gnomonic — the map with no corner at all in the rung below — reaches 44.4°, three times the equal-area map's and far past the conformal one's. The edge's half-length is 35.3°, so the right-hand end is still well inside it.

The corner is not at the midpoint

The rung below measured the corner a feature gets crossing a polyhedral seam, and found none at all under the gnomonic face map. It crossed at the edge's own midpoint every time — the one point on the edge where a face's own mirror symmetry forces the corner to vanish. Two fifths of the way to the vertex the gnomonic gives 20.15°, the equal-area map 7.28° and the conformal map under a degree, which reverses the ordering entirely.

families · Polyhedral

Named alongside it

The objects these essays reach for when they reach for this one.

Polyhedral projectionGnomonicPlatonic solidConformalityEqual-areaInterruptionUnfoldingAngle deficitCombinatoricsIcosahedronSeamSeries truncation

All concepts