Concept

Transverse Mercator — where it appears

Mercator's conformal projection turned through a right angle, so that true scale runs along a chosen central meridian. On the ellipsoid it has no closed form, and every national grid computes it as a truncated series whose forward and inverse halves are separate approximations.

Named by 17 essays across 4 fields — each of them below, with the objects they name alongside it.

A false origin moves every number and no geometry. British National Grid, drawn twice at the same scale. On the left the coordinates are measured from the projection's own origin, where the central meridian meets the true origin's parallel, and 52% of the country takes a negative easting or northing — the worst reaching -323 km. On the right the authority's published false origin of 400 km east and -100 km north has been applied, and none of them does. Every distance computed from the two sets of numbers agrees to the last bit a double has left after carrying six figures, and every bearing agrees exactly; the only thing that changed is that no coordinate carries a sign. The margins say the origin was fitted to the land rather than placed arbitrarily below it: 77 km spare in the west and 50 m in the south, on a grid 988 km tall.

A grid has an origin that is not there

Every published national grid measures from a point in the sea. The British one sits 400 kilometres west and 100 kilometres south of where the projection's own zero is, and moving it changes every coordinate in the country and not one distance or bearing.

practice · Grid
A scale factor is a property of a point, and a distance is not. The grid scale factor sampled along a 362 km line on the British National Grid at a bearing of 90°, with the three rules in use drawn as the constants they replace it by. In a transverse Mercator k depends on the easting almost alone and goes as its square, so along an east–west line the curve is very nearly a parabola. The endpoint mean is the chord across it and lands 268.6 ppm high, which is 97.3 m over this line. Simpson's rule integrates a parabola exactly and lands 0.004 ppm out — 1.3 mm. Neither number is about the line's length.

The scale factor of a line

A scale factor is a property of a point and a distance is not measured at a point. The three rules in use for averaging one along a line differ by a hundred metres on a 362-kilometre baseline, and which of them is adequate is decided by the line's direction rather than its length.

practice · Grid
The scale factor was chosen, and the choice is a V. The worst departure of the grid scale factor from unity across a region 9° wide and 9° tall, for every scale factor between 0.998108 and 1.0002, on a central meridian of 2°W. A tangent projection touches at one meridian and is too big everywhere else, at 1987 ppm. Scaling the whole grid down slides that interval until it straddles unity, and the minimum sits at 1/√k_max = 0.999008102, where the worst departure is 993 ppm — a factor of 2.00, which is the most this construction can buy and is reached exactly. The published value marked beside it was chosen the same way, for this region, in the 1930s.

The scale factor was chosen

A grid's scale factor is not a constant of nature. Britain's 0.9996012717 is the reciprocal square root of the worst distortion a tangent projection would have had over the country, it halves the worst-case error exactly, and the halving is the most that construction can ever buy.

practice · Grid
Transverse Mercator. The graticule of the Transverse Mercator projection at 30° of longitude and 15° of latitude. the only projection on which a constant compass bearing is a straight line. It is conformal.

Transverse Mercator and the series that computes it

The projection most of the world's survey data lives in has no closed form. What every national grid actually computes is a truncated power series in the flattening, and how far it can be trusted is an engineering parameter rather than a property of the projection.

families · Ellipsoid
What a grid of one's own is worth. For every candidate central meridian, the best worst-case distortion achievable over the region once the scale factor has also been optimised — so each point on the curve is already the bottom of its own V. The minimum is at 2.9°W with k₀ = 0.9993009, giving 700 ppm. The dashed line is UTM zone 30, whose meridian and scale factor were chosen for no region in particular, at 1059 ppm. The national grid is better by a factor of 1.51 — which is the whole of the answer to why a country publishes a grid rather than using the zones, and it is a smaller factor than the argument is usually made to sound.

Designing a grid for one region

A country with a grid of its own beats the international zone that would otherwise carry it by a factor of 1.51. That is worth having and it is much less than the argument is usually made to sound, and the difference between the two numbers is the whole case for and against national grids.

practice · Grid
Both zones are right, and one of each is not. A 20 km baseline straddling the boundary between UTM zones 31 and 32 at 52°N, computed from grid coordinates three ways, on logarithmic bars. Taking both ends in zone 31 and taking both in zone 32 give answers 0 nanometres apart — the resolution a double has left after carrying a six-figure easting rather than a disagreement — so a job may use either and the overlap belt every zone publishes exists to let it. Taking each end from the zone it nominally belongs to gives 392 km, because the two eastings are measured from meridians six degrees apart and subtracting them measures nothing at all. The same ground point is 706 km east in one zone and 294 km east in the other, and both coordinates are correct.

Where two zones meet

A twenty-kilometre baseline across a zone boundary is computed correctly in either zone — the two answers differ by nanometres — and taking one end from each returns 392 kilometres. Both zones are right and the seam between them is not a small error but a category one.

practice · Grid
A grid scaled to the ground, and where it stops being one. A surface coordinate system on the British National Grid: the grid multiplied by 1.0004044, the reciprocal of the combined factor at a project origin 120 m above the ellipsoid, so that a grid distance equals a ground distance there. It is exact at the origin by construction and wrong everywhere else, and the two directions are not comparable — the axis is logarithmic across five decades. 60 km due east the set-out distance is out by 5559 mm, and the same distance due north by 20.5 mm. The scale factor of a transverse Mercator depends on the easting and almost not at all on the northing, so a system sold as good "within a few kilometres" has a useful area that is a strip rather than a circle.

A grid scaled to the ground is not a map

Construction sites work in coordinates where a tape reading equals a computed distance, which is achieved by multiplying the national grid by a constant. The result is exact at one point, degrades east–west forty times faster than north–south, and is not a map projection at all.

practice · Grid
Grid north against true north at 52°, across a 6° zone. seven meridians drawn in the grid's own coordinates. The grid's north is straight up the page everywhere by construction; the meridians are not, and the angle between them is the convergence. It is exactly zero on the central meridian, reaches 2.36° — 142 minutes of arc — at 3° out, and changes sign across the middle. The manual's γ = Δλ sin φ is 3.0″ short of it at the zone edge.

Grid north is not north

A grid has one north, parallel everywhere on the sheet by construction. The Earth has a different one at every point. The angle between them reaches two degrees at the edge of a UTM zone, and a straight line on the grid is not a straight line on the ground either.

families · Ellipsoid
The order the corrections go in, and what it costs. Setting out a 51.8 km line on the UTM zone 31N means turning a grid bearing into an azimuth to observe, and there are two corrections: the meridian convergence, 0.8669° here, and the arc-to-chord correction, 6.242″. Each bar carries the lateral offset it produces at the far end of the line, because a bearing error is a number nobody can picture and a sideways miss is the thing that misses. The exact arc-to-chord and the classical formula every manual gives differ by 0.0044″, which is 1.10 mm at the far end — small, real, and the reason the corrections have an order rather than a sum.

Setting out runs the chain backwards

Turning a design coordinate into something to observe on the ground means undoing the reduction chain, and undoing a chain reverses the order as well as the operations. Two of the corrections do not commute, and getting them the wrong way round misses by a millimetre at fifty kilometres.

practice · Reduction
The boundary of the region the series is the map in. The curve where the transverse coordinate reaches 2.918, which is where the terms stop shrinking. It crosses the equator 83.81° from the central meridian and closes towards the poles, because the same longitude is a smaller transverse coordinate at a higher latitude — the boundary is a curve rather than a meridian. The narrow band beside it is a 3° zone, the width national grids actually use, drawn to the same scale: the practical world sits in about a fiftieth of what the series can reach. Drawn in Mollweide.

Where the series stops being the map

The transverse Mercator has no closed form on an ellipsoid, so every national grid computes a truncated series. Asking how many terms it needs has an answer everywhere; asking whether more terms always help has an answer only within 83.81° of the central meridian, and the boundary is computed rather than assumed.

families · Ellipsoid
The scale spread of every grid Britain could have adopted. A grid is conformal by requirement, so its angular deformation is zero everywhere and the whole design problem is the spread of its one remaining number: the largest scale factor over the region divided by the smallest, in parts per million. The grid's own scale factor does not enter — multiplying every scale by a constant leaves the ratio alone, which is why it is chosen last. The bottom bar is Chebyshev's optimum, the conformal map of this region whose scale is constant on its boundary, which no map of any family can beat; the adopted grid sits 1.98 times above it. Measured over a stated box rather than a coastline, because a coastline would put the vendor's generalisation into the answer.

The best grid a country could have had

A national grid is a conformal map chosen for one region, so its whole design problem is one number: the spread of its scale factor. That number has a theoretical floor, this site can now compute it, and the adopted grid turns out to be either exactly optimal or half as good again — depending entirely on which box the country is declared to be.

practice · Grid
Going out and coming back, at three orders. A point three degrees from the central meridian, taken forward into the projection and back again with the series truncated at the same order both ways, and the ground distance between where it started and where it returned. The second-order pair is out by a tenth of a metre at some latitudes; the third by half a millimetre; the fourth — the order every national grid formula in ordinary use is written to — by 0.39 mm. The dips are where one of the two series passes through a node, not where the map is better.

The inverse of the series is not the series of the inverse

Transverse Mercator on an ellipsoid has no closed form, so every national grid computes it as a truncated series. There are two of them — one out and one back — and they are separate approximations. Composing them does not give the identity: at the order every grid formula in ordinary use is written to, a point three degrees from the central meridian comes back 0.39 mm north of where it started.

families · Ellipsoid
The widest zone a tolerance of 690 parts per million allows. At each latitude, the half-width at which a transverse Mercator grid with its scale factor rebalanced for that width reaches 690 ppm at its worst point. That tolerance is the one UTM actually meets at the equator, so the curve passes through UTM's own 3° there — and rises to 37.0° at 85° north, because a degree of longitude covers cos φ of the ground and the scale error goes as the square of the ground width. Six degrees is the answer at one latitude.

Sixty zones was a decision about one latitude

Twelve rungs price a grid, a zone, an origin and a reference, and every one of them works inside a single zone. The number of zones has never been asked about: six degrees meets its tolerance at the equator and is loose everywhere else, so a system spending the same tolerance evenly would use 51 zones at the equator and 8 at 82° — and UTM's worst error is 981 parts per million, not the 400 always quoted.

practice · Grid
A parallel, and the places with the same northing as its middle. Both curves are drawn on a transverse Mercator zone 6° wide at 45° north. The upper one is the parallel — every place on it is at the same latitude — and it climbs 4379 metres of northing on the way to the zone edge. The lower one is the set of places whose northing equals the parallel's on the central meridian. Between them lies every pair the grid puts in the wrong order, and its widest point is 4.39 kilometres of latitude.

Further north on the grid is not further north

Thirteen rungs price a grid's origin, scale, units and zones, and every one treats a coordinate as a position. It is also an ordering, and the two disagree: a parallel climbs 4,379 metres of northing on its way to the edge of a UTM zone, so two places 4.4 kilometres apart in latitude can be listed in the wrong order — and the share of pairs it happens to is the convergence, in a different unit.

practice · Grid
One pair of numbers, a hundred and twenty places. The easting 412,000 and northing 5,678,000, interpreted in each of the sixty zones and in both hemispheres. The northern candidates are a ring of sixty at 51.247° north, spaced exactly six degrees apart; the southern ones are a second ring at -39.043°, which is not the mirror of the first because the southern convention subtracts the northing from ten million. Every one of the hundred and twenty is a perfectly valid reading of the same two numbers.

One pair of numbers, a hundred and twenty places

A UTM coordinate is two numbers and a zone. Drop the zone and the numbers are still valid in each of the sixty; drop the hemisphere too and the pair names a hundred and twenty places. They form two rings at one latitude each, spaced exactly six degrees apart, and every one of them has the same grid convergence and the same scale factor — so no further geometric measurement can choose between them.

practice · Grid
Two expansions of one integral. The worst error along the whole meridian, against the number of sine terms kept, for the series in the third flattening and the classical series in e². Both are checked against a Simpson's rule on the defining integral, which shares no algebra with either. At one and two terms they are the same number to four digits and the e² series is fractionally ahead; from the third term the n series pulls away, and at four it is 1175 times more accurate — 7.6e-8 metres against 9.0e-5.

Which small quantity the series is in

Every ellipsoidal formula in this collection is a truncated series in the third flattening, inherited from Krüger in 1912 and justified nowhere. Measured against the classical expansion in e², at four sine terms it is 1,175 times more accurate — and at one and two terms it is fractionally worse, which is not what the folklore implies.

wrong · Ellipsoid

The fourth number the ellipse does not carry

A Jacobian has four independent entries and an indicatrix reports three. The missing one is the rigid rotation in the polar decomposition A = R·S, the indicatrix is exactly S, and R is what turns north into grid north: for the transverse Mercator it agrees with the survey formula for convergence to 5 × 10⁻¹⁰ degrees, from a different library and a different derivative.

distortion · Tissot

Named alongside it

The objects these essays reach for when they reach for this one.

National GridZoneScale factorUTMConvergenceToleranceCentral meridianVerificationBoundaryConformalityConventionGrid north

All concepts