Cartographic Projection
every map is wrong, and by exactly how much
Concept

Plane survey — where it appears

A survey computed as though the ground were flat, which is valid inside a radius set by the tolerance. The error grows as the square of the region's size, so the radius follows from the tolerance rather than from convention.

Named by 4 essays across 3 fields — each of them below, with the objects they name alongside it.

How large a patch can be treated as flat, at 10 parts per million. The smallest scale distortion any map of a circular patch can have, against the radius of the patch, on logarithmic axes. The line is straight with a slope of 2.00: the error grows as the SQUARE of the size, so a patch ten times wider is a hundred times worse. A tolerance of 10 ppm is reached at a radius of 40.3 km — 81 km across — and that is the number behind the boundary between plane surveying and geodesy.

How small is flat enough

A builder works in plane coordinates and a national mapping agency does not, and the line between them is not a convention. The unavoidable error of treating a patch of the Earth as flat grows as the square of its size, and the size at any stated tolerance is a number.

impossibility · Curvature How much curvature varies from place to place, body by body. The Gaussian curvature along a meridian, each body against its own smallest value, so the curves are comparable. Written from the bodies actually drawn: Earth varies by 1.0135, Mars varies by 1.0239, Vesta varies by 2.71, Phobos varies by 4.16, from the flattest place on each to the sharpest. A surface of constant curvature is a sphere and nothing else is, so the impossibility argument this field is built on has a local version on every real body: how flat a patch is depends on where the patch is.

Curvature that varies from place to place

The impossibility this site is built on was argued on a sphere, where the curvature is one number. On the Earth it varies by 1.35 per cent, on Jupiter by 31, on Vesta by a factor of 2.7 — and on a body with three axes it varies along a parallel, which no formula in latitude can express.

impossibility · Curvature Fitting a polynomial to Mollweide, and what each order buys. An affine, a quadratic and a cubic transformation fitted by least squares between the sphere and Mollweide over patches from 8° down to 0.5° radius, centred at 20°E 40°N. Each is a straight line on these axes and its slope is one more than its own degree: 1 → 2.00, 2 → 3.00, 3 → 4.00. That is not a coincidence and it is this ladder's subject: the first thing a model of degree d cannot represent is the term of degree d+1, so the affine model's error is governed by the second derivative — the flexion and skewness measured everywhere else here.

A local model has an order

Every georeferencing tool fits a polynomial between two coordinate systems and the choice of degree is usually made by counting control points. What it buys is an order of convergence — 2, 3 and 4, measured — and the first term an affine model cannot hold is the second derivative this ladder has spent five essays on.

distortion · Flexion Which corrections a 10 mm job may leave out. Each correction inverted: the line length — or, for the last row, the patch radius — at which that correction alone reaches 10 mm, for a job 150 m above the ellipsoid on 2° of ground, 0.0° from the British National Grid's central meridian. The tightest is the slope reduction at 16 m. Three of the four rows are linear in the tolerance, so this ranking is the same at a millimetre and at a decimetre; what does change it is the site — move the job up a mountain or onto steeper ground and the order is different, which is why a specification's list is not transferable.

The tolerance decides the model

Every correction inverts to a distance — the line length at which it alone exceeds a stated tolerance. The ranking those distances produce is the same at a millimetre and at a decimetre, and it is different for two jobs at the same tolerance on different ground.

practice · Reduction

Named alongside it

The objects these essays reach for when they reach for this one.

ToleranceQuadratic lawGaussian curvatureNational GridRadius of curvatureScale factorBoundaryChebyshev's boundClosed formCombined factorConvergence orderDevelopable surface

All concepts