Boundary — the ladder
-
One sentence, and the ground between its readings
Every land boundary in the world is defined by a sentence, and a sentence naming two monuments does not name a curve. "A straight line" between the Rio Grande and the Colorado admits at least three answers 7.53 kilometres apart at their worst; "the forty-ninth parallel" admits four, 96 kilometres apart, with 130,972 square kilometres between the extremes.
-
The line a commission can actually run
A boundary commission cannot run a parallel of latitude. It can sight a straight line between monuments, and a straight line between two points of equal latitude passes poleward of the parallel — by s² tan φ / 8R, which at a mile of spacing is fifty-eight millimetres and at a hundred kilometres is two hundred and twenty-six metres. The described line and the marked line are different curves, and the marked one governs.
-
A meridian boundary moves when its datum does
The 141st meridian is the one boundary description in this collection with no geometric ambiguity in it: every reading of it is the same curve, exactly. It has a different one. A longitude refers to a datum, the 1825 convention named none, and the line of longitude exactly 141° west sits 129.0 metres apart on NAD27 and WGS84 — a ribbon 1,039 kilometres long and 134 square kilometres in area.
-
An equidistance line belongs to a surface
A maritime boundary is very often defined as the line equidistant from two coasts — a description with no coordinate in it and no curve to choose between. It has a third ambiguity: equidistant measured how. On the ellipsoid, on the sphere, and with a ruler on three different charts, the same four basepoints give lines up to 39.6 kilometres apart and 2,816 square kilometres of seabed between them.
-
A tripoint defined three times
A tripoint is very often not a coordinate in any treaty. It is a description — the point where the boundary between A and B meets the boundary between B and C — and each of those boundaries is itself a description. So the point is defined three times, once by each pair, and under one convention throughout the three definitions agree to half a micrometre. Under three they enclose 6.69 square kilometres.