Cartographic Projection
every map is wrong, and by exactly how much
Figure

A scale factor is a property of a point, and a distance is not

Drawn here at the parameters it defaults to, with every essay that calls it.
A scale factor is a property of a point, and a distance is not. The grid scale factor sampled along a 362 km line on the British National Grid at a bearing of 90°, with the three rules in use drawn as the constants they replace it by. In a transverse Mercator k depends on the easting almost alone and goes as its square, so along an east–west line the curve is very nearly a parabola. The endpoint mean is the chord across it and lands 268.6 ppm high, which is 97.3 m over this line. Simpson's rule integrates a parabola exactly and lands 0.004 ppm out — 1.3 mm. Neither number is about the line's length.

The grid scale factor sampled along a 362 km line on the British National Grid at a bearing of 90°, with the three rules in use drawn as the constants they replace it by. In a transverse Mercator k depends on the easting almost alone and goes as its square, so along an east–west line the curve is very nearly a parabola. The endpoint mean is the chord across it and lands 268.6 ppm high, which is 97.3 m over this line. Simpson's rule integrates a parabola exactly and lands 0.004 ppm out — 1.3 mm. Neither number is about the line's length.

It is drawn by survey-figure with show: "line-scale" — one member of a family of 16 figures that share a generator, so the drawing above is what that generator returns when it is asked for this one and given nothing else.

4 essays call it. Every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the one its essay argues about.

Where it is called

Changing this changes every one of these figures.

A scale factor is a property of a point, and a distance is not. The grid scale factor sampled along a 362 km line on the British National Grid at a bearing of 90°, with the three rules in use drawn as the constants they replace it by. In a transverse Mercator k depends on the easting almost alone and goes as its square, so along an east–west line the curve is very nearly a parabola. The endpoint mean is the chord across it and lands 268.6 ppm high, which is 97.3 m over this line. Simpson's rule integrates a parabola exactly and lands 0.004 ppm out — 1.3 mm. Neither number is about the line's length. Grids, and what a survey does

The scale factor of a line

A scale factor is a property of a point and a distance is not measured at a point. The three rules in use for averaging one along a line differ by a hundred metres on a 362-kilometre baseline, and which of them is adequate is decided by the line's direction rather than its length.

 Four steps between a tape and a drawing. A slope distance of 76.895 km measured at 3.2° on ground 220 m above sea level, reduced to the British National Grid, with every step drawn on a logarithmic scale in millimetres. The slope reduction is the largest by a wide margin at 119.90 m and is the one everybody applies. The grid reduction is 30.23 m. The fourth bar is not a step at all: it is what using the levelled height where the height above the ellipsoid is wanted costs, with a geoid separation of 48.5 m — 583 mm, which is 1.9% of the grid reduction it sits beside and 29 times the tolerance the job closes to. Reading a correction's importance off its share of the chain is how it gets dropped. Grids, and what a survey does

What a tape measures

Four steps stand between an instrument reading and a coordinate, and their sizes are not in the order anybody expects. On a 77-kilometre line the slope reduction is 120 metres, the grid reduction 30, and a step nobody names — using the height above sea level where the height above the ellipsoid is wanted — is 583 millimetres.

 Two conventions, and neither of them finds the blunder. A blunder of 350 mm added to leg 3 of a closed traverse, producing a misclosure of 350 mm — one part in 8344, which most specifications would accept. Bowditch's rule shares the misclosure out in proportion to leg length; the Transit rule shares it in proportion to each leg's component along the axis being corrected. Both close the figure exactly, so both are valid; they disagree with each other by up to 14 mm; and neither puts more than 104 mm of correction on the leg that is actually wrong. A rule for distributing a misclosure is a convention for producing consistent numbers, and it is not an instrument for finding errors. Grids, and what a survey does

The two ways to spread a misclosure

Bowditch's rule and the Transit rule take the same closed figure and the same misclosure and disagree about which legs were wrong. Both close it exactly, neither puts the correction on the leg that actually carries the blunder, and no measurement can settle which is right.

 The scale spread of every grid Britain could have adopted. A grid is conformal by requirement, so its angular deformation is zero everywhere and the whole design problem is the spread of its one remaining number: the largest scale factor over the region divided by the smallest, in parts per million. The grid's own scale factor does not enter — multiplying every scale by a constant leaves the ratio alone, which is why it is chosen last. The bottom bar is Chebyshev's optimum, the conformal map of this region whose scale is constant on its boundary, which no map of any family can beat; the adopted grid sits 1.98 times above it. Measured over a stated box rather than a coastline, because a coastline would put the vendor's generalisation into the answer. Grids, and what a survey does

The best grid a country could have had

A national grid is a conformal map chosen for one region, so its whole design problem is one number: the spread of its scale factor. That number has a theoretical floor, this site can now compute it, and the adopted grid turns out to be either exactly optimal or half as good again — depending entirely on which box the country is declared to be.

The whole library