Cartographic Projection
every map is wrong, and by exactly how much
Figure

Two feet, and the one that is not a rounding

Drawn here at the parameters it defaults to, with every essay that calls it.
Two feet, and the one that is not a rounding. The US survey foot is 1200/3937 m and the international foot is exactly 0.3048 m, so the first is longer by 2.0000 parts per million. Read a coordinate in the wrong one and the error is proportional to the coordinate, not to any distance in the job: at 2.5 million feet from the false origin it reaches 1.52 m, and it crosses a survey's own closing tolerance of twenty millimetres at 33 thousand feet. Across a 300-foot site the same mistake changes every dimension by 0.18 mm — below every tolerance there is, which is why a plan in the wrong foot passes every check and is in the wrong place.

The US survey foot is 1200/3937 m and the international foot is exactly 0.3048 m, so the first is longer by 2.0000 parts per million. Read a coordinate in the wrong one and the error is proportional to the coordinate, not to any distance in the job: at 2.5 million feet from the false origin it reaches 1.52 m, and it crosses a survey's own closing tolerance of twenty millimetres at 33 thousand feet. Across a 300-foot site the same mistake changes every dimension by 0.18 mm — below every tolerance there is, which is why a plan in the wrong foot passes every check and is in the wrong place.

It is drawn by survey-figure with show: "foot-drift" — one member of a family of 16 figures that share a generator, so the drawing above is what that generator returns when it is asked for this one and given nothing else.

3 essays call it. Every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the one its essay argues about.

Where it is called

Changing this changes every one of these figures.

Only one of a grid's five parameters changes the map. The same ground point written on the British National Grid and on UTM zone 31N, with the difference between the two coordinate pairs taken apart. The largest term by four orders of magnitude is where the two grids put zero — 5544 km, being a different central meridian, a different true origin and different false constants, all of which move every coordinate and no distance. The datum, which is the term everybody names, moves the ground 106 m. And the whole geometric difference between two transverse Mercators is their scale factors — 0.9996012717 against 0.9996 — which at this point is 50 cm. Four of a grid's five parameters are bookkeeping; the fifth is the map. Grids, and what a survey does

What a grid is made of

A projected coordinate declares five things — a datum, a projection, its parameters, a unit and an axis order — and four of them are invisible in the numbers. Every one has a documented case of being guessed wrong, and the cheapest of those cost a hundred metres.

 Two feet, and the one that is not a rounding. The US survey foot is 1200/3937 m and the international foot is exactly 0.3048 m, so the first is longer by 2.0000 parts per million. Read a coordinate in the wrong one and the error is proportional to the coordinate, not to any distance in the job: at 2.5 million feet from the false origin it reaches 1.52 m, and it crosses a survey's own closing tolerance of twenty millimetres at 33 thousand feet. Across a 300-foot site the same mistake changes every dimension by 0.18 mm — below every tolerance there is, which is why a plan in the wrong foot passes every check and is in the wrong place. Grids, and what a survey does

The units are part of the coordinate

Two feet were in use in the United States until 2022, differing by exactly two parts per million. A plan drawn in the wrong one has every dimension right to a fifth of a millimetre and sits three-quarters of a metre from where it belongs, which is why it passes every check anybody runs.

 Which corrections a 10 mm job may leave out. Each correction inverted: the line length — or, for the last row, the patch radius — at which that correction alone reaches 10 mm, for a job 150 m above the ellipsoid on 2° of ground, 0.0° from the British National Grid's central meridian. The tightest is the slope reduction at 16 m. Three of the four rows are linear in the tolerance, so this ranking is the same at a millimetre and at a decimetre; what does change it is the site — move the job up a mountain or onto steeper ground and the order is different, which is why a specification's list is not transferable. Grids, and what a survey does

The tolerance decides the model

Every correction inverts to a distance — the line length at which it alone exceeds a stated tolerance. The ranking those distances produce is the same at a millimetre and at a decimetre, and it is different for two jobs at the same tolerance on different ground.

The whole library