Figure

A false origin moves every number and no geometry

Drawn here at the parameters it defaults to, with every essay that calls it.

A false origin moves every number and no geometry. British National Grid, drawn twice at the same scale. On the left the coordinates are measured from the projection's own origin, where the central meridian meets the true origin's parallel, and 52% of the country takes a negative easting or northing — the worst reaching -323 km. On the right the authority's published false origin of 400 km east and -100 km north has been applied, and none of them does. Every distance computed from the two sets of numbers agrees to the last bit a double has left after carrying six figures, and every bearing agrees exactly; the only thing that changed is that no coordinate carries a sign. The margins say the origin was fitted to the land rather than placed arbitrarily below it: 77 km spare in the west and 50 m in the south, on a grid 988 km tall.

British National Grid, drawn twice at the same scale. On the left the coordinates are measured from the projection's own origin, where the central meridian meets the true origin's parallel, and 52% of the country takes a negative easting or northing — the worst reaching -323 km. On the right the authority's published false origin of 400 km east and -100 km north has been applied, and none of them does. Every distance computed from the two sets of numbers agrees to the last bit a double has left after carrying six figures, and every bearing agrees exactly; the only thing that changed is that no coordinate carries a sign. The margins say the origin was fitted to the land rather than placed arbitrarily below it: 77 km spare in the west and 50 m in the south, on a grid 988 km tall.

It is drawn by survey-figure with show: "false-origin" — one member of a family of 16 figures that share a generator, so the drawing above is what that generator returns when it is asked for this one and given nothing else.

6 essays call it. Every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the one its essay argues about.

Where it is called

Changing this changes every one of these figures.

A false origin moves every number and no geometry. British National Grid, drawn twice at the same scale. On the left the coordinates are measured from the projection's own origin, where the central meridian meets the true origin's parallel, and 52% of the country takes a negative easting or northing — the worst reaching -323 km. On the right the authority's published false origin of 400 km east and -100 km north has been applied, and none of them does. Every distance computed from the two sets of numbers agrees to the last bit a double has left after carrying six figures, and every bearing agrees exactly; the only thing that changed is that no coordinate carries a sign. The margins say the origin was fitted to the land rather than placed arbitrarily below it: 77 km spare in the west and 50 m in the south, on a grid 988 km tall.

Grids, and what a survey does

A grid has an origin that is not there

Every published national grid measures from a point in the sea. The British one sits 400 kilometres west and 100 kilometres south of where the projection's own zero is, and moving it changes every coordinate in the country and not one distance or bearing.

Only one of a grid's five parameters changes the map. The same ground point written on the British National Grid and on UTM zone 31N, with the difference between the two coordinate pairs taken apart. The largest term by four orders of magnitude is where the two grids put zero — 5544 km, being a different central meridian, a different true origin and different false constants, all of which move every coordinate and no distance. The datum, which is the term everybody names, moves the ground 106 m. And the whole geometric difference between two transverse Mercators is their scale factors — 0.9996012717 against 0.9996 — which at this point is 50 cm. Four of a grid's five parameters are bookkeeping; the fifth is the map.

Grids, and what a survey does

What a grid is made of

A projected coordinate declares five things — a datum, a projection, its parameters, a unit and an axis order — and four of them are invisible in the numbers. Every one has a documented case of being guessed wrong, and the cheapest of those cost a hundred metres.

Two feet, and the one that is not a rounding. The US survey foot is 1200/3937 m and the international foot is exactly 0.3048 m, so the first is longer by 2.0000 parts per million. Read a coordinate in the wrong one and the error is proportional to the coordinate, not to any distance in the job: at 2.5 million feet from the false origin it reaches 1.52 m, and it crosses a survey's own closing tolerance of twenty millimetres at 33 thousand feet. Across a 300-foot site the same mistake changes every dimension by 0.18 mm — below every tolerance there is, which is why a plan in the wrong foot passes every check and is in the wrong place.

Grids, and what a survey does

The units are part of the coordinate

Two feet were in use in the United States until 2022, differing by exactly two parts per million. A plan drawn in the wrong one has every dimension right to a fifth of a millimetre and sits three-quarters of a metre from where it belongs, which is why it passes every check anybody runs.

Only one of a grid's five parameters changes the map. The same ground point written on the British National Grid and on UTM zone 31N, with the difference between the two coordinate pairs taken apart. The largest term by four orders of magnitude is where the two grids put zero — 5544 km, being a different central meridian, a different true origin and different false constants, all of which move every coordinate and no distance. The datum, which is the term everybody names, moves the ground 106 m. And the whole geometric difference between two transverse Mercators is their scale factors — 0.9996012717 against 0.9996 — which at this point is 50 cm. Four of a grid's five parameters are bookkeeping; the fifth is the map.

Grids, and what a survey does

Two grids over the same ground

One point in the English Midlands is 406,788 east on the British grid and 167,478 east on UTM. Separating the difference properly leaves a surprise — only one of a grid's five parameters changes the map, and it is not any of the four that dominate the number.

Two parameter sets 100 metres apart, over the region they were fitted to. Each marker is drawn at a size proportional to how far the two transformations put it apart. The second set differs from the first by 100 metres of translation along the direction this network can least see, with the rotations and the scale re-fitted to absorb it — which is what a second agency's adjustment does when it chooses a different constraint. The worst disagreement anywhere in the region is 5.64 metres and the mean is 3.61. Applied at south-eastern Australia the same two sets differ by 193 metres, because the rotation that absorbed the translation here is a rotation of the whole Earth.

What the numbers refer to

Two parameter sets, one transformation

Agencies publish seven-parameter datum transformations that differ by hundreds of metres in translation, and the usual reading is that one of them is better. Over the region either was fitted to they are the same transformation: a hundred metres of translation, re-absorbed by the rotations and the scale, moves a British coordinate by 5.6 metres and an Australian one by 193.

What a 3-figure grid reference names. The square is the 100-metre cell a 3-figure reference stands for, and the filled dot is the point the reference was made from. A reference is TRUNCATED rather than rounded, so the digits name the square's south-west corner — the open dot — which here is 9.1 metres west and 82.8 metres south of the point. Rounding would have landed on the nearest corner instead, 9.1 metres away east–west. The truncation is deliberate: it is what makes a shorter reference a larger square containing the same point.

Grids, and what a survey does

A grid reference names a square

This ladder has priced everything about a grid except how a coordinate on it is written. A grid reference is truncated rather than rounded, so it names the south-west corner of a square rather than a point in it — and a population of references is displaced half a cell each way, which is a bias rather than scatter and does not average out.

The whole library